Last family shot before assembly.
Inside of booms detail.
Kilroy was here, all is well, we can button up!
Well, almost. Just before assembling the fuse parts I realized there was a visible gap behind the pilot seat.
So I made a firewall with some stock material.
Much better!
After assembly came the tedious work of filling, sanding and re-scribing. Some of the kit's panel lines and rivets had to be entirely re-scribed as they were far too shallow.
For the big rivets I used a hypo needle cut straight with its edge filed to a sharp edge. Works like a charm.
No comments:
Post a Comment